SEBA: Équipement de protection individuelle

  • Le regard toujours tourné vers l’avenir:
  • Le Catalogue:
  • Sécurité au travail:
  • Coming Soon! Chaussures de travail et de travail VOLARE
  • Fashion at Work
  • Etes-vous sûr d'utiliser les bons EPIs ?
  • Parrainage de l'équipe IMPERIALE RACING
  • Le regard toujours tourné vers l’avenir:

    L’innovation et la technologie se mêlent pour créer des EPIs d'avant-garde, par l’utilisation de matériaux de plus en plus performants, résistants, légers, et par la recherche des dernières tendances en matière de design, car “l'oeil aussi veut sa part”.
  • Le Catalogue:

    Le nouveau catalogue SEBA 2026 est en ligne

    Dans notre catalogue, vous pourrez découvrir une large gamme de produits de sécurité dédiés à votre activité.

    Lire la suite

  • Sécurité au travail:

    Prévenir les accidents graves, en informant et en équipant correctement les utilisateurs dans tous les secteurs d’activité.
  • Coming Soon! Chaussures de travail et de travail VOLARE

    SEBA est heureuse d'annoncer qu'une nouvelle gamme de chaussures de sécurité et de travail sous la marque « Volare » sera bientôt lancée. La marque "Volare", déjà connue dans le passé, a été rachetée par SEBA qui a décidé de continuer à produire des chaussures de travail et de loisirs, mais pas seulement.
  • Fashion at Work

    Sécurité, Confort, Légèreté et Fashion, car “l'oeil veut aussi sa part”.
  • Etes-vous sûr d'utiliser les bons EPIs ?

    Faites confiance à SEBA, qui produit des EPIs de qualité depuis 1968
  • Parrainage de l'équipe IMPERIALE RACING

    SEBA a décidé de parrainer l'IMPERIALE RACING TEAM qui participe au Championnat italien de Sprint Gran Turismo, l'un des événements les plus excitants et compacts pour les voitures GT sur la scène automobile italienne et internationale.

    A bord de la Lamborghini Huracan GT3 EVO, le pilote Alex Frassineti porte notre Logo sur le casque, sur la combinaison et sur la voiture!

    Lire la suite

2016 Flyers

We have released the flyers with all the new Seba products. Download here.

Equipments de Protection Individuelle
société

Equipments de Protection Individuelle

L' experience que SEBA a aquise dans la production des equiments de protection individuelle leur permet de garantir un service permanent de haute qualité à ses propres clients, grâce à la fiabilité des dispositifs et à la ponctualité des livraisons. .
Partant d'une étude appronfondie des exigences spécifiques des utililisateurs finaux, SEBA est à même de proposer des solutions combinées qui sont hautement personalisables tant au point de vue téchnique et fonctionnel que au point de vue du conditionnement et de la sérigrafie. SEBA a une connaisance complète des normes concernantes les équipments de protection individuelle afin d'offrir des conseils spécifiques à ses revendeurs et partnaires.

calzature 1

PROTECTION FOR FEET

Our feet are an extremely important part of our body, not only allowing us to remain balanced and to move, but above all they pick up a series of sensations which affect our well-being. Shoes house our feet, and therefore, like our own homes, they must be studied and chosen carefully to obtain the best possible comfort. Inside materials in contact with the feet must be as natural as possible. Synthetics, in fact, do not create a natural inside micro-climate because they are less breathable. The shape of the shoes must also be the proper size even after the first two hours of use, after which the foot, due to stress and fatigue, tend to swell and occupy more space. After these first two hours, our feet undergo other 6 working hours in which comfort and well-being must be ensured constantly.

MAIN COMPONENTS

Uppers
EA main component in footwear, delegated with the job of breathing. In synthesis, these can be created in:

  1. grain leather (natural leather, good breathability, good water repellence, soft)
  2. coated split leather (coating carried out to have them resemble grain leather but occludes leather porosity)
  3. suede split leather (maximised breathability if not coated inside, generally utilised for summer footwear, does not however offer any impermeability but easily soaks with water and oils)
  4. other materials

Sole
Can be made with many different materials, for example:

  1. rubber – good mechanical resistance and can be mixed with accentuated resistance to oils and heat, with antistatic properties, etc
  2. polyurethane (mono or bi-density) – material widely used for its lightness, flexibility and softness, as well as for its elevated chemical resistance, for its elevated anti-slip and anti-static properties. The bi-density version includes an expanded layer which is softer and more flexible on the side of the foot and a more compact layer like a tread. Low heat resistance.
  3. polyurethane + rubber (or polyurethane and nitrile) – the sum of the above-indicated features
  4. nitrile rubber – optimal resistance to chemical agents and heat, generally less flexible

Insole

  1. in natural leather: perfectly absorbs transpiration and has good resistance
  2. in regenerated leather: created using ground leather with bonding agents

Tie
Notable differences exist between toes: the most important are their form and type of lining at the connection point with the upper.

EN 20344
CE marking certifies that footwear satisfies the following essential requirements of European directive 89/686/CEE:

  1. Ergonomics
  2. Harmlessness
  3. Comfort
  4. Solidity
  5. Protection against falls due to slipping

EN 20345
Work footwear according to Norm EN 20345 are marked with an "S" (safety) like safety footwear. On "base" shoes we can find the letters "SB" (Safety - Base). This footwear must meet the following minimum requirements:

  1. upper height
  2. tip (minimum length, minimum weight-bearing base)
  3. front lining
  4. foot-strap
  5. sole in any type of material (can be smooth)
  6. upper of base footwear can be open.

"SB" footwear need not include all following requirements if not specified:

  1. anti-static
  2. energy absorption from the heel
  3. dynamic impenetrability on the upper
  4. sole with anti-slipping features
  5. sole with foot grips
  6. rear lining
  7. grain leather upper
  8. anti-hole laminate

calzature 2

EN 20346
Work footwear according to Norm EN 20346 is called "protective footwear." These are essentially identical to safety footwear. The only differences are:

  1. protective tip with energy absorption of 100 J
  2. marked with "P" (protective) instead of "S" (safety footwear)

Note: use in all workplaces where protection 100 J is sufficient

EN 20347
Work footwear according to Norm EN 20347 are called "Work" or "professional" footwear.
These are essentially identical to previously-detailed footwear. They are different because they do not have any protective tip and markings "S" and "P" are replaced with "O" (occupational) and therefore are identified with 01, 02, 03.

FOOTWEAR MARKINGS

On the basis of category SB, S1, S2, S3, footwear must possess determined requirements identifiable by symbol markings: A, E, WRU, P, HI, CI, HRO

Category SB - requirements: minimum requirements.
Category S1 - requirements: minimum requirements, A (supplementary anti-static requirements), E (energy absorption in the heel area).
Category S2 - requirements: minimum requirements, A (supplementary anti-static requirements), E (energy absorption in the heel area) ,WRU (water –penetration and absorption – upper).
Category S3 - requirements: minimum requirements, A (supplementary anti-static requirements), E (energy absorption in the heel area),WRU (water –penetration and absorption – upper), P (perforation resistance).
HI (heat insulation), CI (cold insulation) and HRO (resistance to contact heat) are non-compulsory requirements, indicated on footwear if present.

Browse Catalog

Sales Network

In addition to the established presence in traditional markets such as the Iberian peninsula, the Balkans and Greece and a number of dealers in several other European countries, Seba maintains a constant effort to expand its international sales network.